Description
Off-Road performance bump stop replacements The Active Off-Road Bump stops offer off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a harsh stop at the end of axle travel the axle energy is absorbed producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bump stops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bump stops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bump stops carry a lifetime warranty and a satisfaction guarantee. The ABSJRGD replaces the rear bump stops on the Jeep Gladiator. Install a bump stop kit and experience the difference. This kit is rated for 2000 lbs. and has a bump-load capacity of 4800 lbs.
- Maintain Full Suspension Travel
- Smooth Engagement and Disengagement
- Enhance Suspension Performance
- Absorbs Energy and Cushions Road Shock
- Stronger than OEM Bump stops
- Easy Installation
- 100 Day Money Back Guarantee
- Lifetime Warranty
Information:
Rear Kit
Application Summary:
| Year | Make/Model |
|---|---|
| 2020-2025 | Jeep Gladiator |
| Attributes | |
| Amount of Deflection (Compression) | 2.25 in. (subtract 1/2 in. if not using spacer), 2.25 in. (subtract 1/2 in. if not using spacer) |
| Bump Load Capacity | 4,800 lbs., 4,800 lbs. |
| California Proposition 65 | No |
| Capacity | 2,000 lbs. |
| Color | Black |
| Country of Origin (Primary) | CA |
| GTIN | 00809933009292 |
| Grade | Performance |
| Grade Type | Performance |
| Harmonized Tariff Code (Schedule B) | 4016993000 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Material | Natural Rubber, Rubber, Rubber |
| Mounting Hardware Included | Yes |
| NAFTA Preference Criterion Code | B |
| Overall Kit Height | 5.5 in. (subtract 1/2 in. if not using spacer), 5.5 in. (subtract 1/2 in. if not using spacer) |
| Rated Capacity | 2000 |
| SDR Required Flag | N |
| Specs | 2,000 lb capacity, 4,8000 lb bump load capacity, Overall kit height = 5.5 in. (subtract 1/2 in. if not using spacer), Total deflected (compressed) height = 3.25 in. (subtract 1/2 in. if not using spacer), Amount of deflection (compression) = 2.25 in. (subtract 1/2 in. if not using spacer) |
| Spring Rate | Progressive, Progressive |
| Total Deflected (Compressed) Height | 3.25 in. (subtract 1/2 in. if not using spacer), 3.25 in. (subtract 1/2 in. if not using spacer) |
| Universal Or Specific Fit | Specific |
| What’s Included | (2x) Aeon(r) hollow rubber springs (bump stops), (2x) 1/2 in. Rubber spacers, (2x) Mounting brackets, (2x) Steel cups, All necessary hardware, (2x) Aeon(r) hollow rubber springs (bump stops), (2x) 1/2 in. Rubber spacers, (2x) Mounting brackets, (2x) Steel cups, All necessary hardware |
Reviews
There are no reviews yet.